DJI FPV DRONE FLY MORE COMBO HOW TO
DJI FPV DRONE FLY MORE COMBO INSTALL

Press the power button once to check the battery level.

TIP: In S Mode, press the C1 button once to switch the roll-angle limit for the drone.

On the front side of the remote controller you can find the customisable C1 button, Lanyard Attachment, and Power Button.

Control stick slots are located on both sides of the remote controller.

The DJI FPV Remote Controller 2 has a USB-C port in the middle that can be used for charging, or to connect to a computer for firmware updates.

DJI FPV DRONE FLY MORE COMBO HOW TO

How To Set Up The DJI FPV Remote Controller 2

DJI FPV DRONE FLY MORE COMBO INSTALL

You can also purchase and install DJI FPV Goggles Corrective Lenses according to your visual needs. You can adjust the interpupillary distance by moving the slider left or right.

On the bottom of the goggles you will find the IPD slider.

TIP: The goggles SD card only stores cached videos. The USB-C port can be used to connect with smartphones via the OTG cable (included in the accessory box).

The microSD card slot and USB-C port are on the left side.

On the right side of the goggles you will find a Link button, Power Port, and Audio Port.

Toggle right to shift menu options right, toggle left to shift menu options left. Toggle up to go back, and toggle down to move to the next option. Toggle the 5D button to scroll through the menu and press to confirm a selection.

On the upper right side of the goggles you will find the Shutter/Record button, Back button, and 5D button.

Ensure the antennas are properly tightened before flying.

The front of the DJI FPV Goggles V2 has four replaceable antennas to ensure optimum signal receiving and communication.Insert the battery into the battery compartment. Make sure it is secured in place.TIP: Attach the propellers with red rings in the centre to the motors with red rings, and attach the ones without red rings to the corresponding motors. Align the propeller on the motor, then press down and rotate to secure them. Ensure the propellers are properly attached.RockSteady stabilisation is only available for recorded footage, but not for the live view of the goggles. TIP: A microSD card is required to save videos in high definition.

Open the microSD card cover and insert a microSD card.

To find out more about the DJI Motion Controller, which can be used to control the drone with your hand movements, read our Guide To The Motion Controller. Want to know more about the DJI FPV drone? Then read our hands-on review. This tutorial blog will teach you about setting up the FPV drone, goggles, and remote controller, and how to work the basic operating functions to get you in the air quickly and safely. The DJI FPV Drone Combo provides a high-octane and immersive flight experience.

Dji fpv drone fly more combo